54 Channels DMX
Output Upto
9 Projectors
4 Digit LED Display
Showing
Program/Run
Speed/Cross Time
9 Programs and
each program
up to 50steps

• DMX Signal :
3Pin XLR
Female x 1

• Power Input :
DC 9V-12V 500mA
(Adaptor
is Included)

• Size : L300x
W152x
H72mm

• Weight : 2.1kg.

• Designed to control a wide variety of DMX scanners. 192 channels for DMX output can control up to 12 fixtures (up to 16 channels each).

• 30 banks containing up to 240 scenes, each bank correspond to 8 scenes.

• 6 chases for the program/run status dimmer / run speed / fade time under control and standard midi iterance.

• 4 digit LED showing program / run status dimmer / run speed / fade time under control and standard Midi interface.

• Midi signal: Effective in brands and chases.

• DMX signal: 3 pin XLR female x 1

• Audio signal: by built – in microphone

• Remote control: blackout controlled by midi input signal

• 12/24 channels for DMX output

• 4 pages containing 48 sets of program (each page corresponding to 12 sets of programs/ single chase/ mix chase under controlled by audio/tap sync/manual speed mode/ memory backup/ full-on/dark/ blind / home/ chase direction/fade time/speed /audio level/ master dimmer under controlled / standard midi interface.

• Function Mode: chase scenes / double preset / single preset

• Midi: Effective in program turn on / off, mode chance, step change, blackout, dark and full-on, filedump is available

• DMX signal: 3pin XLR female x 1

• Audio Signal: by built-in microphone or line in

• Remote Control: blackout and full-on under controlled by foot controlled

• Power Input: DC 12V 500m MIN. (Adapter is included0

•  DMX 512 OR 0-10V Controlled 6CH.

•  Dimming pack with hanger automatic fuses

• DMX –512 or analog input: 0-10V

• 54 per Channel total: 16A

• Controlled by one or four channel DMX single

• Auto chase or auto parallel

• Circuit Breaker: 1z6A

• Wall Mount or on truss by clamp

• Size: 318 x 165 x 96mm

• DMX distributor with one input and two outputs

• Absolutely electric isolation between input and output, or between output and output

• Two types of DMX connector (3 pin & 5 pin) for each individual channel, each DMX output feature an independent driver

• Input and output with a set of respective power supply

• DMX distributor with one input and two outputs

• Absolutely electric isolation between input and output, or between output and output

• Two types of DMX connector (3 pin & 5 pin) for each individual channel,

• Every DMX output features an independent driver, data & data-indicator

• DMX switch is incorporated allowing isolation from the malformation caused by DMX input

• Input and output with a set of respective power supply and 50MA internal fuse